skip to Main Content

BELMONT BELSENSOR GOLD / DENTALAIRE DTX / DENTIMAX4 / EVA SELECT / TUXEDO A-SERIES / QUICKRAY / XDR

Note: The general e2v II sensor extension for DCV has been discontinued as of 01/11/2013. In its place, Apteryx has released extensions appropriately named for each Original Equipment Manufacturer (OEM) that distributes the sensor using their own private label.

Version 10.1 Build 6
Beta Release Date: 10/30/2017
Release Date: 1/3/2018
Driver Version: 3.7.0

  1. Initial release of “Tuxedo A-Series” Sensor extension. (F3657)
  2. Added low dose detection utility to announce when images are under exposed. (F3588)
  3. Established default filter sets for Tuxedo A extension. (F3540)

Version 10.1 Build 3
Beta Release Date: 6/20/2016
Release Date: 1/6/2017
Driver Version: 3.7.0

  1. Added AImg filters to specific OEM version of IXDLL. (F2860)

Version 10.1 Build 2
Beta Release Date: 9/14/2015
Release Date: 9/14/2015
Driver Version: 3.7.0

  1. Add new capture mode – capture endo series from selected image. (F2858)

Version 10.1 Build 1
Beta Release Date: Internal
Release Date: TBD
Driver Version: 3.7.0

  1. Added support for driver version 3.7.0. (F2851)
  2. Added automatic rotation for newer size 2 sensors. (F2821)

Version 10.0 Build 15
Beta Release Date: 3/03/2015
Release Date: TBD

  1. Changed default settings for the XDR and Belmont extensions. (F2706)
  2. Corrected non-trigger issue that was occuring intermittently. (B1162)
  3. Added logging capability under hardware options. (F2625)
  4. Updated for 3.6.1 driver version SDK. (F2235)
  5. Built extension for Eva Select version. (F2569)

Version 10.0 Build 12
Beta Release Date: 12/03/2014
Release Date: TBD

  1. Add auto-dismissing preview option for progression captures. (F2531)

Version 10.0 Build 11
Beta Release Date: Internal
Release Date: TBD

  1. Built Dentimax 4 version of IXDLL. (F2527) 

Version 10.0 Build 10
Beta Release Date: 6/18/2014
Release Date: TBD

  1. Now remembers last used tooth chart. (F2441)

Version 10.0 Build 9
Beta Release Date: 6/12/2014
Release Date: TBD

  1. Corrected issue where “Display Progressions as Layouts” option not functioning in combined teeth and capture window. (B1076)

Version 10.0 Build 8
Beta Release Date: 5/7/2014
Release Date: TBD

  1. Extension will now proceed automatically with only the modalities that are enabled through preferences. (F1925)
  2. Added capability for tooth defintion settings to carry over from DCV preference. (F2280)
  3. Added scroll wheel support to the progression selection in the combined tooth/progression selection window. (F2307)
  4. Added ability to display previously captured images when user is capturing additional into existing series. (F2358)

10.0 Build 7
Beta Release Date: 1/16/2014
Release Date: TBA

  1. Added ability for DCV and IXDLLs to share tooth definition settings. (F2280)

10.0 Build 6
Beta Release Date: 1/6/2014
Release Date: TBA

  1. Modifications to capture selection window to include tooth chart and progression/layout choices. (F1982)

10.0 Build 5
Beta Release Date: 1/6/2014
Release Date: TBA

  1. Added watermark for specific dealer. (F1992)

10.0 Build 3
Beta Release Date: 04/30/2013
Release Date: TBA

  1. Corrected issue when moving images between tiles in veterinary mode would display human tooth associations. (F1718)
  2. Corrected handling of intial and subsequent tiles of continuous endo series. (F1737)

Changed single

10.0 Build 2
Beta Release Date: 01/10/2013
Release Date: TBA

  1. Changed single capture capture window to start maximized when initiated. (F1602)
  2. Added ability to view images full screen while in anatomical layout capture. (1659)
  3. Added voice recognition support. (F1290)
  4. Added OEM version for XDR. (F1702)

10.0 Build 1
Release Date: NA

  1. Initial creation. (F1595)
  2. Added OEM version IXDLL extension for Bel-Sensor Gold. (F1421)
  3. Added OEM version IXDLL extension for Dentalaire DTX. (F1602)