skip to Main Content

Version 10.0 Build 25
Beta Release Date: 9/12/2016
Release Date: 1/6/2017

  1. Added new despeckle filter to remove spec noise while preserving the fine details and edges in an image (F3225)
  2. Added parallelization to speed up image enhancement time. (F2869)

Version 10.0 Build 24
Beta Release Date: 9/11/2015
Release Date: 1/14/2016

  1. Added new cancel feature options. (2848)

Version 10.0 Build 23
Beta Release Date: Internal
Release Date: TBD

  1. Add new capture mode – capture endo series from selected image. (F2858)

Version 10.0 Build 22
Beta Release Date: 2/6/2015
Release Date: TBD

  1. Corrected a possible memory leak that could occur in progression captures with image holding area enabled. (F2633)

Version 10.0 Build 21
Beta Release Date: 12/3/2014
Release Date: TBD

  1. Add auto-dismissing preview option for progression captures. (F2531)

Version 10.0 Build 20
Beta Release Date: 6/18/2014
Release Date: TBD

  1. Now remembers last used tooth chart. (F2441)

Version 10.0 Build 19
Beta Release Date: 6/12/2014
Release Date: TBD

  1. Corrected issue where “Display Progressions as Layouts” option not functioning in combined teeth and capture window. (B1076)

Version 10.0 Build 18
Beta Release Date: 5/7/2014
Release Date: TBD

  1. Extension will now proceed automatically with only the modalities that are enabled through preferences. (F1925)
  2. Added capability for tooth defintion settings to carry over from DCV preference. (F2280)
  3. Added scroll wheel support to the progression selection in the combined tooth/progression selection window. (F2307)
  4. Added ability to display previously captured images when user is capturing additional into existing series. (F2358)

Version 10.0 Build 17
Beta Release Date: 01/16/2014
Release Date: TBA

  1. Modified capture selection window into a combined single image tooth selection and progression selection prompt. (F1982)

Version 10.0 Build 16
Beta Release Date: Internal
Release Date: TBA

  1. Added ability for DCV and IXDLLs to share tooth definition settings. (F2280)

Version 10.0 Build 15
Beta Release Date: 05/03/2013
Release Date: TBD

  1.  Image focus now defaults to image when moved from holding bar. (F1778)
  2. New option to display image operations in main interface rather than pop out menu. (F1778)
  3. Corrected issue when moving images between tiles in veterinary mode would display human tooth associations. (F1718)
  4. Corrected handling of intial and subsequent tiles of continuous endo series. (F1737)

Version 10.0 Build 14
Beta Release Date: 03/22/2013
Release Date: TBD

  1. Added ability to choose modality through the capture additional. (F1779)
  2. Corrected possible issue that could corrupt .dat file leading to crashing. (B922)

Version 10.0 Build 11
Beta Release Date: 01/11/2013
Release Date: TBD

  1. Now bypasses the tooth selection window when the PX modality is selected. (F1647)
  2. Adjusted filter rules for PX and IO modalities. (F1660)
  3. Added ability to view images full screen while in anatomical layout capture. (1659)
  4. Added voice recognition support. (F1290)
  5. Fixed issue with improper rotations during layout capture in anatomical view (B864)

Version 10 Build 9
Release Date: NA

  1. Added some new imaging algorithms to available post capture filters. (F1390)

Version 10.0 Build 8
Release Date: NA

  1. Fixed issue with images being labeled as retake with no tooth association during layout capture. (B716)

Version 10.0 Build 7
Release Date: 10/25/2011

  1. Corrected issue under Preferences>Miscellaneous settings, where the check box for “Display progression captures as layouts whenever possible” was missing. (B660)

Version 10.0 Build 6
Release Date: 9/29/2011

  1. Added option to drop new images into a “plate holder” at the bottom of the screen during progression capture. Note: Anatomical layout capturing will be implemented in DCV (F1024)

Version 10.0 Build 5
Release Date: 9/29/2010

  1. Corrected rotation for image return. Plates should be scanned with the “a” marker down, within DCV that marker is treated as the top of the sensor. (B615)
  2. Now displays the units serial number, ini version, and driver version. (B603)

Version 10.0 Build 3
Release Date: 7/26/2011

  1. Resolved issue with hardware information (serial number, driver version, Vistascan INI file location) being displayed in ScanX capture interface. (B603)
  2. Added option to drop new images into a “plate holder” at the bottom of the screen during progression capture. Note: Anatomical layout capturing will be implemented in DCV (F1024)

Version 1.1 Build 3
Release Date: 12/2/09

  1. Corrected a crash that could occur when rotating, inverting or flipping images during layout capture after the user clicked on the “Done” option.
  2. Corrected red ‘X’ icon that was associated with an OK button.
  3. Corrected image rotation issue with continues endo series acqusitions.